Edge Trim

Edge Trim

Edge Trim is used to form the Concrete Slab Edge, which acts as a permanent formwork to the edges to the concrete Slab. The Edge Trim is formed from light gauge galvanised steel manufactured to the same height as the required slab thickness, this allows the slab to be formed to the exact height with a perfect edge. This is achieved not only by the strength of the edge shuttering but also by the steel restraint straps which fix to the top of the edge trim every 600mm to give additional rigidity to the up stand.

We carry a large stock of all the popular edge depths, 130, 150, 200 supplied in 3m lengths complete with the required quantity of restraint straps. Other profiles can be manufactured to your specifications for further information please contact us.

Our Edge Trims are widely used on Pre-cast concrete slabs and metal decking projects when pouring concrete in-situ to form floors. Once the steel decking has been laid, the edge shuttering is then fixed around the perimeters of the slab and any internal openings within the slab. Concrete can then be poured in-situ onto the metal deck floor to the required height of the slab.

Description

Formed in Galvanised Mild Steel similar to Metal Deck Flooring. Supplied in 3m lengths with Restraint Straps. Typical Gauges 0.9, 1.2, 1.6, 2.0mm

We supply a range of Edge Trims to form the Concrete Slab Edge. They act as a permanent formwork to the edges of the concrete Slab. The Edge Trim is formed from light gauge galvanised steel formed to the same height as the required slab depth, this allows the slab to be cast to the exact height with a clean finished edge. This is achieved in combination by the strength of the edge shuttering and the steel restraint straps which fix to the top of the edge trim every 600mm giving additional rigidity to the up stand.

We carry a large stock of all the popular edge trim depths, 130, 150, 200 they are supplied in 3m lengths complete with the required quantity of restraint straps. Other profiles can be formed to your specifications for further information please contact us.

Our Edge Trims are widely used not only on Metal deck Flooring contracts but any job where a neat concrete slab edge is required. Once the steel decking has been laid, the edge trims are then fixed around the perimeter of the slab and any internal openings within the slab. Concrete can then be poured in-situ onto the metal deck floor to the required depth of the slab.

For the full Tata Steel technical information.